User Manual Boosted ReVOLT! Dashboard For design and feature description, please read my previous blog post. What's in the box? The following items should be shipped to you: One Boosted ReVOLT! Dashboard User manual pointing to this article 2 NFC 13.56Mhz MiFare Classic Tags, one of which acts as a master key (marked 'M') My eternal gratitude Installing your Dashboard Hardware, using original cables Prepare your scooter to install the dashboard: Open up the deck of your scooter and make sure your VESC is completely switched off. Remove connections from the cable going to the dashboard. If possible, unplug the battery. Pry the protective top lens of by inserting very carefully something sharp alongside the edge of the lens. A hobby knife tends to do the job well. The lens is held in place by glue and comes off easily. Take off the lens. Use a Torx driver to remove both screws that holds in place the plastic filter. Remove the filter. Carefully lift the original dashboard. Ca